Assembling a Beachshadow could not be easier and once you have done it for the first time then you'll find your own way of doing it in different beach, weather and ground conditions. Here is a short video showing it being assembled as per the standard instructions in the booklet you get with the kit. As they say, "a picture is worth a thousand words"
You can also click here to see some instructions on setting up a Beachshadow
 |
Take out all the poles |
 |
Take the centre elasticated section and
allow the poles to slot into the centre to
produce the roof structure
|
 |
Place roof structure where you want to
have the beachshadow located
|
 |
Place two vertical poles next to the end
of the roof section on each corner
|
 |
Lift the roof section and noting the
direction of the arrows on the end caps,
place on the vertical poles
|
 |
Place a guideline at the end of each
corner
|
 |
Place the cover corner eyelets over
the vertical poles and secure by the
guideline
|
 |
In stronger winds either loop the guideline
over the vertical pole or loop around the
vertical pole itself beneath the cover before
tightening the guideline
|
Click here to return to the Technical page
Click here to return to the Home page
